KinCony KC868-A6
PWM (DAC) outputs — for smooth heating and pumps
- 6 relay outputs
- 6 digital inputs
- 4 analog inputs
- 2 PWM outputs
- 2 1-Wire buses
Wi-Fi
View in the KinCony store · $50oCBot · compatible hardware
What oCBot runs on
The oCBot firmware installs on ready-made KinCony ESP32 controllers — or on your own ESP32 board. Several controllers work together as one system.
KinCony KC868-A16
The most inputs and outputs — for an apparatus with many valves and sensors
- 16 relay outputs
- 16 digital inputs
- 4 analog inputs
- 3 1-Wire buses
Ethernet and Wi-Fi
View in the KinCony store · $75Your own ESP32 board
You set the pin map in the firmware settings — peripherals and scripts stay the same.
Please note: the v3 boards (ESP32-S3) are not supported yet — choose the ESP32 (WROOM-32) version.
What is supported
- 27 peripheral types on any pin: temperature, flow, pressure, level, pump, valve, relay, heater…
- Expansion: Modbus RTU (RS-485) modules — relays, inputs, 4–20 mA; ADS1115 ADC; PCA9685 PWM; 1-Wire buses.
- 12 basic scripts: Thermostat, Water Level, Heater Control, Cooling loop, Wash feed, ABV Calculation, Mixing, Steam pressure, Steam generator, Volume Fill, Doser, Fraction switch.
- An operator panel on a phone or PC — no cloud and no code required.
- Several controllers in one system: the scenario on one, scripts on the others.
Next steps
The licence is bound to your controller: install the firmware yourself or with our help.